Remote-reading water meter

Brass remote-reading water meter
Function:
The function of this product is to measure the total flux of the drinking water passing through the water pipeline, and transform the volume of water usage to electrical signal for transmission
Characteristic:
The meter of this series is dry water meter with magnetic-driven type wheel and needles for combined display between impeller and counter. It is convenient to get clear readings from the meter with anti-freezing function.
The signal is transmitted by dry reed pipe or hall components that will transform the volume of water usage to electrical signals for transmission.
Each time with 10 liters (or 100 liters) water passing through, there will be one signal sent out.
Application condition:
Water temperature is equal to or less than 40C
Water pressure is equal to or less than 1Mpa
Installation requirement:
1\The water meter must be installed in horizontal level with reading side upward and arrow direction must be the same as water current direction.
2\Water pipeline needed to be washed before installation of water meter.;
3. The water meter must be installed in a dry environment and be convenient for disassembly and maintenance.
It is suggested that the water meter be installed in a box specially designed for water meter. Valves must be installed both in the front of meter and at the back of the meter.

Size mm	Class	q s MAX. Flow	q p Nominal Flow	q t Transitional Flow	q min Min. Flow	Min. Reading	Max. Reading
		m 3 /h		L/h		m 3
13	B	3	1.5	120	30	0.001	99999
20	B	5	2.5	200	50	0.001	99999

 

Contact us if you need more details on Remote-reading Water Meter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pulse Water Meter、Remote Water Meter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Water Meter Valves & Parts > Water Meter Valve& Meter